Hi all
I’ve just installed Panda3D 1.8 on Ubuntu 12.04 64 bit, the installation seemed to run fine, the output is below, but there’s no samples directory in the Panda3D directory. I wanted to test the installation but now I’m worried that something went wrong.
Many thanks
Mark
Installation output
mark@mark-System-Product-Name:~$ sudo apt-get install panda3d1.8
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
x11-apps xserver-xorg-input-evdev libxrandr-ltsq2 x11-xfs-utils libmtdev1
libdrm-nouveau2 xinit x11-session-utils libfs6 libllvm3.1
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
blt libcg libegl1-mesa libegl1-mesa-drivers libgbm1 libgles1-mesa
libilmbase6 libllvm3.0 libopencv-core2.3 libopencv-highgui2.3
libopencv-imgproc2.3 libopenexr6 libopenvg1-mesa libosmesa6 libwayland0
libxcb-xfixes0 nvidia-cg-toolkit panda3d-runtime python-pmw python-tk
python-wxversion
Suggested packages:
blt-demo python-pmw-doc tix python-tk-dbg
The following NEW packages will be installed
blt libcg libegl1-mesa libegl1-mesa-drivers libgbm1 libgles1-mesa
libilmbase6 libllvm3.0 libopencv-core2.3 libopencv-highgui2.3
libopencv-imgproc2.3 libopenexr6 libopenvg1-mesa libosmesa6 libwayland0
libxcb-xfixes0 nvidia-cg-toolkit panda3d-runtime panda3d1.8 python-pmw
python-tk python-wxversion
0 upgraded, 22 newly installed, 0 to remove and 3 not upgraded.
Need to get 69.2 MB/69.8 MB of archives.
After this operation, 283 MB of additional disk space will be used.
Do you want to continue [Y/n]? y
WARNING: The following packages cannot be authenticated!
panda3d-runtime panda3d1.8
Install these packages without verification [y/N]? y
Get:1 http://gb.archive.ubuntu.com/ubuntu/ precise/main libllvm3.0 i386 3.0-4ubuntu1 [7,407 kB]
Get:2 http://archive.panda3d.org/ubuntu/ precise-dev/main panda3d1.8 i386 1.8.0+cvs20120805~precise57 [36.0 MB]
Get:3 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libgbm1 i386 8.0.4-0ubuntu0.4 [1,078 kB]
Get:4 http://gb.archive.ubuntu.com/ubuntu/ precise/main libwayland0 i386 0.85.0-1ubuntu2 [37.1 kB]
Get:5 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libxcb-xfixes0 i386 1.8.1-1ubuntu0.1 [10.2 kB]
Get:6 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libegl1-mesa i386 8.0.4-0ubuntu0.4 [50.7 kB]
Get:7 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libopenvg1-mesa i386 8.0.4-0ubuntu0.4 [13.9 kB]
Get:8 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libegl1-mesa-drivers i386 8.0.4-0ubuntu0.4 [1,874 kB]
Get:9 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libgles1-mesa i386 8.0.4-0ubuntu0.4 [11.2 kB]
Get:10 http://gb.archive.ubuntu.com/ubuntu/ precise/multiverse libcg i386 3.0.0016-0ubuntu1 [2,584 kB]
Get:11 http://gb.archive.ubuntu.com/ubuntu/ precise-updates/main libosmesa6 i386 8.0.4-0ubuntu0.4 [1,148 kB]
Get:12 http://gb.archive.ubuntu.com/ubuntu/ precise/main blt i386 2.4z-4.2ubuntu1 [1,586 kB]
Get:13 http://gb.archive.ubuntu.com/ubuntu/ precise/main libilmbase6 i386 1.0.1-3build2 [121 kB]
Get:14 http://gb.archive.ubuntu.com/ubuntu/ precise/universe libopencv-core2.3 i386 2.3.1-7 [712 kB]
Get:15 http://gb.archive.ubuntu.com/ubuntu/ precise/universe libopencv-imgproc2.3 i386 2.3.1-7 [647 kB]
Get:16 http://gb.archive.ubuntu.com/ubuntu/ precise/main libopenexr6 i386 1.6.1-4.1 [261 kB]
Get:17 http://gb.archive.ubuntu.com/ubuntu/ precise/universe libopencv-highgui2.3 i386 2.3.1-7 [112 kB]
Get:18 http://gb.archive.ubuntu.com/ubuntu/ precise/multiverse nvidia-cg-toolkit i386 3.0.0016-0ubuntu1 [15.4 MB]
Get:19 http://gb.archive.ubuntu.com/ubuntu/ precise/main python-tk i386 2.7.3-1ubuntu1 [27.6 kB]
Get:20 http://gb.archive.ubuntu.com/ubuntu/ precise/universe python-pmw all 1.3.2-6build1 [79.5 kB]
Get:21 http://gb.archive.ubuntu.com/ubuntu/ precise/universe python-wxversion all 2.8.12.1-6ubuntu2 [19.0 kB]
Fetched 69.2 MB in 35s (1,935 kB/s)
Selecting previously unselected package libllvm3.0.
(Reading database ... 221310 files and directories currently installed.)
Unpacking libllvm3.0 (from .../libllvm3.0_3.0-4ubuntu1_i386.deb) ...
Selecting previously unselected package libgbm1.
Unpacking libgbm1 (from .../libgbm1_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package libwayland0.
Unpacking libwayland0 (from .../libwayland0_0.85.0-1ubuntu2_i386.deb) ...
Selecting previously unselected package libxcb-xfixes0.
Unpacking libxcb-xfixes0 (from .../libxcb-xfixes0_1.8.1-1ubuntu0.1_i386.deb) ...
Selecting previously unselected package libegl1-mesa.
Unpacking libegl1-mesa (from .../libegl1-mesa_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package libopenvg1-mesa.
Unpacking libopenvg1-mesa (from .../libopenvg1-mesa_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package libegl1-mesa-drivers.
Unpacking libegl1-mesa-drivers (from .../libegl1-mesa-drivers_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package libgles1-mesa.
Unpacking libgles1-mesa (from .../libgles1-mesa_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package libcg.
Unpacking libcg (from .../libcg_3.0.0016-0ubuntu1_i386.deb) ...
Selecting previously unselected package libosmesa6.
Unpacking libosmesa6 (from .../libosmesa6_8.0.4-0ubuntu0.4_i386.deb) ...
Selecting previously unselected package blt.
Unpacking blt (from .../blt_2.4z-4.2ubuntu1_i386.deb) ...
Selecting previously unselected package libilmbase6.
Unpacking libilmbase6 (from .../libilmbase6_1.0.1-3build2_i386.deb) ...
Selecting previously unselected package libopencv-core2.3.
Unpacking libopencv-core2.3 (from .../libopencv-core2.3_2.3.1-7_i386.deb) ...
Selecting previously unselected package libopencv-imgproc2.3.
Unpacking libopencv-imgproc2.3 (from .../libopencv-imgproc2.3_2.3.1-7_i386.deb) ...
Selecting previously unselected package libopenexr6.
Unpacking libopenexr6 (from .../libopenexr6_1.6.1-4.1_i386.deb) ...
Selecting previously unselected package libopencv-highgui2.3.
Unpacking libopencv-highgui2.3 (from .../libopencv-highgui2.3_2.3.1-7_i386.deb) ...
Selecting previously unselected package nvidia-cg-toolkit.
Unpacking nvidia-cg-toolkit (from .../nvidia-cg-toolkit_3.0.0016-0ubuntu1_i386.deb) ...
Selecting previously unselected package panda3d-runtime.
Unpacking panda3d-runtime (from .../panda3d-runtime_1.0.4+cvs20130208~precise219_i386.deb) ...
Selecting previously unselected package python-tk.
Unpacking python-tk (from .../python-tk_2.7.3-1ubuntu1_i386.deb) ...
Selecting previously unselected package python-pmw.
Unpacking python-pmw (from .../python-pmw_1.3.2-6build1_all.deb) ...
Selecting previously unselected package panda3d1.8.
Unpacking panda3d1.8 (from .../panda3d1.8_1.8.0+cvs20120805~precise57_i386.deb) ...
Selecting previously unselected package python-wxversion.
Unpacking python-wxversion (from .../python-wxversion_2.8.12.1-6ubuntu2_all.deb) ...
Processing triggers for doc-base ...
Processing 2 added doc-base files...
Processing triggers for man-db ...
Processing triggers for bamfdaemon ...
Rebuilding /usr/share/applications/bamf.index...
Processing triggers for desktop-file-utils ...
Processing triggers for gnome-menus ...
Processing triggers for shared-mime-info ...
Setting up libllvm3.0 (3.0-4ubuntu1) ...
Setting up libgbm1 (8.0.4-0ubuntu0.4) ...
Setting up libwayland0 (0.85.0-1ubuntu2) ...
Setting up libxcb-xfixes0 (1.8.1-1ubuntu0.1) ...
Setting up libegl1-mesa (8.0.4-0ubuntu0.4) ...
update-alternatives: using /usr/lib/i386-linux-gnu/mesa-egl/ld.so.conf to provide /etc/ld.so.conf.d/i386-linux-gnu_EGL.conf (i386-linux-gnu_egl_conf) in auto mode.
Setting up libopenvg1-mesa (8.0.4-0ubuntu0.4) ...
Setting up libegl1-mesa-drivers (8.0.4-0ubuntu0.4) ...
Setting up libgles1-mesa (8.0.4-0ubuntu0.4) ...
Setting up libcg (3.0.0016-0ubuntu1) ...
Setting up libosmesa6 (8.0.4-0ubuntu0.4) ...
Setting up blt (2.4z-4.2ubuntu1) ...
Setting up libilmbase6 (1.0.1-3build2) ...
Setting up libopencv-core2.3 (2.3.1-7) ...
Setting up libopencv-imgproc2.3 (2.3.1-7) ...
Setting up libopenexr6 (1.6.1-4.1) ...
Setting up libopencv-highgui2.3 (2.3.1-7) ...
Setting up nvidia-cg-toolkit (3.0.0016-0ubuntu1) ...
Setting up panda3d-runtime (1.0.4+cvs20130208~precise219) ...
running ldconfig
Setting up python-tk (2.7.3-1ubuntu1) ...
Setting up python-pmw (1.3.2-6build1) ...
Setting up panda3d1.8 (1.8.0+cvs20120805~precise57) ...
running ldconfig
Setting up python-wxversion (2.8.12.1-6ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking placeContents of Panda3D directory
mark@mark-System-Product-Name:/usr/share/panda3d$ ls -l
total 80
drwxr-xr-x 48 root root 4096 Mar 19 18:28 direct
-rwxr-xr-x 1 root root 1569 Aug 5 2012 LICENSE
drwxr-xr-x 7 root root 4096 Mar 19 18:28 models
-rwxr-xr-x 1 root root 9173 Aug 5 2012 panda3d.py
drwxr-xr-x 3 root root 4096 Mar 19 18:28 pandac
drwxr-xr-x 2 root root 4096 Mar 19 18:28 plugins
drwxr-xr-x 3 root root 4096 Mar 19 18:28 Pmw
-rwxr-xr-x 1 root root 43385 Aug 5 2012 ReleaseNotes
How do I know if I installed the buildbot version and can I get a ‘normal’ version?