Common State Changes

Don't mind the mess!

We're currently in the process of migrating the Panda3D Manual to a new service. This is a temporary layout in the meantime.

Summary

This page lists some of the most common changes you can make to a 3D node. This page is really only a quick cheat-sheet summary: the detailed documentation for these operations comes later in the manual.

State Change Cheat Sheet

Two of the most common changes are position and orientation.

myNodePath.set_pos(X, Y, Z);
myNodePath.set_hpr(Yaw, Pitch, Roll);

By default in Panda3D, the X axis points to the right, the Y axis is forward, and Z is up. An object's rotation is usually described using Euler angles called Heading, Pitch, and Roll (sometimes called Yaw, Pitch, and Roll in other packages)--these specify angle rotations in degrees. (If you are more comfortable using quaternions, the set_quat() method can be used to specify the rotation as a quaternion.)

You can change an object's size, either uniformly, or with a different value of x, y, and z.

myNodePath.set_scale(S);

Sometimes it is convenient to adjust a single component individually:

myNodePath.set_x(X);

myNodePath.set_y(Y); myNodePath.set_z(Z); myNodePath.set_h(H); myNodePath.set_p(P); myNodePath.set_r(R); myNodePath.set_sx(SX); myNodePath.set_sy(SY);

myNodePath.set_sz(SZ);

Or all at the same time:

myNodePath.set_pos_hpr_scale(X, Y, Z, H, P, R, SX, SY, SZ);

You can also query the current transform information for any of the above:

myNodePath.get_pos();

myNodePath.get_x(); myNodePath.get_y();

myNodePath.get_z();

Also, by using the functions set_tag() and get_tag() you can store your own information in key value pairs. For example:

myNodePath.set_tag("Key", "value");

As a more advanced feature, you may also set or query the position (or any of the above transform properties) of a particular NodePath with respect to another one. To do this, specify the relative NodePath as the first parameter:

myNodePath.set_pos(otherNodePath, X, Y, Z);
myNodePath.get_pos(otherNodePath);

Putting a NodePath as the first parameter to any of the transform setters or getters makes it a relative operation. The above set_pos() means to set myNodePath to the position (X, Y, Z), relative to otherNodePath--that is, the position myNodePath would be in if it were a child of otherNodePath and its position were set to (X, Y, Z). The get_pos() call returns the position myNodePath would have if it were a child of otherNodePath.

It is also important to note that you can use the NodePath in its own relative sets and gets. This maybe helpful in situations where you are concerned with distances. For example:

// Move myNodePath 3 units forward in the x
myNodePath.set_pos(myNodePath, 3, 0, 0);

These relative sets and gets are a very powerful feature of Panda's scene graph, but they can also be confusing; don't worry if it doesn't make sense right now.

The look_at() method rotates a model to face another object; that is, it rotates the first object so that its +Y axis points toward the second object. Note that a particular model might or might not have been generated with the +Y axis forward, so this doesn't necessarily make a model "look at" the given object.

myNodePath.look_at(otherObject);

Color changes are another common alteration. Values for color are floating point numbers from 0 to 1, 0 being black, 1 being white.

myNodePath.set_color(R, G, B, A);

If models have textures, they may not be distinguishable or even visible at certain color settings. Setting the color to white may restore the visibility of the texture, but it is better to simply clear the current color settings.

myNodePath.clear_color();

Note the fourth component of color is alpha. This is usually used to indicate transparency, and it is usually 1.0 to indicate the object is not transparent. If you set the alpha to a value between 0 and 1, you can fade the object to invisible. However, in order for the alpha value to be respected, you must first enable transparency:

myNodePath.set_transparency(TransparencyAttrib::M_alpha);

The parameter to set_transparency() is usually TransparencyAttrib::M_alpha, which is ordinary transparency. You can also explicitly turn transparency off with TransparencyAttrib::M_none. (Other transparency modes are possible, but that is a more advanced topic. Some older code may pass just 0 or 1 for this parameter, but it is better to name the mode.) If you don't explicitly enable transparency first, the alpha component of color may be ignored. Be sure you don't enable transparency unnecessarily, since it does enable a more expensive rendering mode.

Setting an object's color completely replaces any color on the vertices. However, if you have created a model with per-vertex color, you might prefer to modulate the object's color without losing the per-vertex color. For this there is the set_color_scale() variant, which multiples the indicated color values by the object's existing color:

myNodePath.set_color_scale(R, G, B, A);

One use of set_color_scale() is to apply it at the top of the scene graph (e.g. render) to darken the entire scene uniformly, for instance to implement a fade-to-black effect.

Since alpha is so important, there is also a method for scaling it without affecting the other color components:

myNodePath.set_alpha_scale(SA);

To temporarily prevent an object from being drawn on all cameras, use hide() and show():

myNodePath.hide();
myNodePath.show();

If you want to hide an object for one camera but not another, you can use the hide() and show() commands in conjunction with the camera.set_camera_mask() function:

camera1.node()->set_camera_mask(BitMask32::bit(0));

camera2.node()->set_camera_mask(BitMask32::bit(1)); myNodePath.hide(BitMask32::bit(0)); myNodePath.show(BitMask32::bit(1));

// Now myNodePath will only be shown on camera2...

Please note that using hide/show without an argument will mess up any hide/shows with the argument (show(bit) will not undo a hide()...) To hide an object from all cameras instead use nodepath.hide(BitMask32::all_on()). Please see the camera section for information on how to set up multiple cameras.


Any object that is parented to the object that is hidden will also be hidden.

Previous Top Next