Panda3D
Public Member Functions | Static Public Member Functions | List of all members
PhysxRevoluteJoint Class Reference

A joint which behaves in a similar way to a hinge or axel. More...

#include "physxRevoluteJoint.h"

Inheritance diagram for PhysxRevoluteJoint:
PhysxJoint PhysxObject PhysxEnums TypedReferenceCount TypedObject ReferenceCount MemoryBase MemoryBase

Public Member Functions

virtual TypeHandle force_init_type ()
 
float get_angle () const
 Retrieves the current revolute joint angle. More...
 
bool get_flag (PhysxRevoluteJointFlag flag) const
 Returns the value of a single RevoluteJointFlag. More...
 
PhysxMotorDesc get_motor () const
 
PhysxProjectionMode get_projection_mode () const
 Retrieves the joints projection mode. More...
 
PhysxSpringDesc get_spring () const
 
virtual TypeHandle get_type () const
 
float get_velocity () const
 Retrieves the revolute joint angle's rate of change (angular velocity). More...
 
void link (NxJoint *jointPtr)
 
void load_from_desc (const PhysxRevoluteJointDesc &jointDesc)
 Loads the entire state of the joint from a descriptor with a single call. More...
 
NxJoint * ptr () const
 
void save_to_desc (PhysxRevoluteJointDesc &jointDesc) const
 Saves the state of the joint object to a descriptor. More...
 
void set_flag (PhysxRevoluteJointFlag flag, bool value)
 Sets or clears a single RevoluteJointFlag. More...
 
void set_limits (const PhysxJointLimitDesc &low, const PhysxJointLimitDesc &high)
 Sets angular joint limits. More...
 
void set_motor (const PhysxMotorDesc &motor)
 Sets motor parameters for the joint. More...
 
void set_projection_mode (PhysxProjectionMode mode)
 Sets the joint projection mode. More...
 
void set_spring (const PhysxSpringDesc &spring)
 Sets spring parameters. More...
 
void unlink ()
 
- Public Member Functions inherited from PhysxJoint
void add_limit_plane (const LVector3f &normal, const LPoint3f &pointInPlane, float restitution=0.0f)
 Adds a limit plane. More...
 
PhysxActorget_actor (unsigned int idx) const
 Retrieves the actor which this joint is associated with. More...
 
LPoint3f get_global_anchor () const
 Retrieves the joint anchor. More...
 
LVector3f get_global_axis () const
 Retrieves the joint axis. More...
 
const char * get_name () const
 Returns the name string. More...
 
PhysxSceneget_scene () const
 Retrieves the scene which this joint is associated with. More...
 
float get_solver_extrapolation_factor () const
 Retrieves the solver extrapolation factor. More...
 
bool get_use_acceleration_spring () const
 Checks whether acceleration spring is used. More...
 
void ls () const
 
void ls (std::ostream &out, int indent_level=0) const
 
void purge_limit_planes ()
 Deletes all limit planes added to the joint. More...
 
void release ()
 
void set_breakable (float maxForce, float maxTorque)
 Sets the maximum force magnitude that the joint is able to withstand without breaking. More...
 
void set_global_anchor (const LPoint3f &anchor)
 Sets the point where the two actors are attached, specified in global coordinates. More...
 
void set_global_axis (const LVector3f &axis)
 Sets the direction of the joint's primary axis, specified in global coordinates. More...
 
void set_limit_point (const LPoint3f &pos, bool isOnActor2=true)
 Sets the limit point. More...
 
void set_name (const char *name)
 Sets a name string for this object. More...
 
void set_solver_extrapolation_factor (float factor)
 Sets the solver extrapolation factor. More...
 
void set_use_acceleration_spring (bool value)
 Switch between acceleration and force based spring. More...
 
- Public Member Functions inherited from TypedReferenceCount
 TypedReferenceCount (const TypedReferenceCount &copy)
 
void operator= (const TypedReferenceCount &copy)
 
- Public Member Functions inherited from TypedObject
 TypedObject (const TypedObject &copy)=default
 
TypedObjectas_typed_object ()
 Returns the object, upcast (if necessary) to a TypedObject pointer. More...
 
const TypedObjectas_typed_object () const
 Returns the object, upcast (if necessary) to a TypedObject pointer. More...
 
int get_best_parent_from_Set (const std::set< int > &) const
 
int get_type_index () const
 Returns the internal index number associated with this object's TypeHandle, a unique number for each different type. More...
 
bool is_exact_type (TypeHandle handle) const
 Returns true if the current object is the indicated type exactly. More...
 
bool is_of_type (TypeHandle handle) const
 Returns true if the current object is or derives from the indicated type. More...
 
TypedObjectoperator= (const TypedObject &copy)=default
 
- Public Member Functions inherited from ReferenceCount
int get_ref_count () const
 
WeakReferenceListget_weak_list () const
 Returns the WeakReferenceList associated with this ReferenceCount object. More...
 
bool has_weak_list () const
 Returns true if this particular ReferenceCount object has a WeakReferenceList created, false otherwise. More...
 
void local_object ()
 This function should be called, once, immediately after creating a new instance of some ReferenceCount-derived object on the stack. More...
 
void ref () const
 Explicitly increments the reference count. More...
 
bool ref_if_nonzero () const
 Atomically increases the reference count of this object if it is not zero. More...
 
bool test_ref_count_integrity () const
 Does some easy checks to make sure that the reference count isn't completely bogus. More...
 
bool test_ref_count_nonzero () const
 Does some easy checks to make sure that the reference count isn't zero, or completely bogus. More...
 
virtual bool unref () const
 Explicitly decrements the reference count. More...
 
WeakReferenceListweak_ref ()
 Adds the indicated PointerToVoid as a weak reference to this object. More...
 
void weak_unref ()
 Removes the indicated PointerToVoid as a weak reference to this object. More...
 

Static Public Member Functions

static TypeHandle get_class_type ()
 
static void init_type ()
 
- Static Public Member Functions inherited from PhysxJoint
static PhysxJointfactory (NxJointType shapeType)
 
static TypeHandle get_class_type ()
 
static void init_type ()
 
- Static Public Member Functions inherited from PhysxObject
static TypeHandle get_class_type ()
 
static void init_type ()
 
- Static Public Member Functions inherited from TypedReferenceCount
static TypeHandle get_class_type ()
 
static void init_type ()
 
- Static Public Member Functions inherited from TypedObject
static TypeHandle get_class_type ()
 
static void init_type ()
 This function is declared non-inline to work around a compiler bug in g++ 2.96. More...
 
- Static Public Member Functions inherited from ReferenceCount
static TypeHandle get_class_type ()
 
static void init_type ()
 

Additional Inherited Members

- Public Types inherited from PhysxEnums
enum  PhysxActorFlag {
  AF_disable_collision = NX_AF_DISABLE_COLLISION, AF_disable_response = NX_AF_DISABLE_RESPONSE, AF_lock_com = NX_AF_LOCK_COM, AF_fluid_disable_collision = NX_AF_FLUID_DISABLE_COLLISION,
  AF_contact_modification = NX_AF_CONTACT_MODIFICATION, AF_force_cone_friction = NX_AF_FORCE_CONE_FRICTION, AF_user_actor_pair_filtering = NX_AF_USER_ACTOR_PAIR_FILTERING
}
 
enum  PhysxBodyFlag {
  BF_disable_gravity = NX_BF_DISABLE_GRAVITY, Bf_frozen_pos_x = NX_BF_FROZEN_POS_X, BF_frozen_pos_y = NX_BF_FROZEN_POS_Y, BF_frozen_pos_z = NX_BF_FROZEN_POS_Z,
  BF_frozen_rot_x = NX_BF_FROZEN_ROT_X, BF_frozen_rot_y = NX_BF_FROZEN_ROT_Y, BF_frozen_rot_z = NX_BF_FROZEN_ROT_Z, BF_frozen_pos = NX_BF_FROZEN_POS,
  BF_frozen_rot = NX_BF_FROZEN_ROT, BF_frozen = NX_BF_FROZEN, BF_kinematic = NX_BF_KINEMATIC, BF_visualization = NX_BF_VISUALIZATION,
  BF_filter_sleep_vel = NX_BF_FILTER_SLEEP_VEL, BF_energy_sleep_test = NX_BF_ENERGY_SLEEP_TEST
}
 
enum  PhysxBroadPhaseType { BPT_sap_single = NX_BP_TYPE_SAP_SINGLE, BPT_sap_multi = NX_BP_TYPE_SAP_MULTI }
 
enum  PhysxClothFlag {
  CLF_pressure = NX_CLF_PRESSURE, CLF_static = NX_CLF_STATIC, CLF_disable_collision = NX_CLF_DISABLE_COLLISION, CLF_selfcollision = NX_CLF_SELFCOLLISION,
  CLF_visualization = NX_CLF_VISUALIZATION, CLF_gravity = NX_CLF_GRAVITY, CLF_bending = NX_CLF_BENDING, CLF_bending_ortho = NX_CLF_BENDING_ORTHO,
  CLF_damping = NX_CLF_DAMPING, CLF_collision_twoway = NX_CLF_COLLISION_TWOWAY, CLF_triangle_collision = NX_CLF_TRIANGLE_COLLISION, CLF_tearable = NX_CLF_TEARABLE,
  CLF_hardware = NX_CLF_HARDWARE, CLF_comdamping = NX_CLF_COMDAMPING, CLF_validbounds = NX_CLF_VALIDBOUNDS, CLF_fluid_collision = NX_CLF_FLUID_COLLISION,
  CLF_disable_dynamic_ccd = NX_CLF_DISABLE_DYNAMIC_CCD, CLF_adhere = NX_CLF_ADHERE
}
 
enum  PhysxCombineMode { CM_average = NX_CM_AVERAGE, CM_min = NX_CM_MIN, CM_multiply = NX_CM_MULTIPLY, CM_max = NX_CM_MAX }
 
enum  PhysxContactPairFlag {
  CPF_ignore_pair = NX_IGNORE_PAIR, CPF_notify_on_start_touch = NX_NOTIFY_ON_START_TOUCH, CPF_notify_on_end_touch = NX_NOTIFY_ON_END_TOUCH, CPF_notify_on_touch = NX_NOTIFY_ON_TOUCH,
  CPF_notify_on_impact = NX_NOTIFY_ON_IMPACT, CPF_notify_on_roll = NX_NOTIFY_ON_ROLL, CPF_notify_on_slide = NX_NOTIFY_ON_SLIDE, CPF_notify_forces = NX_NOTIFY_FORCES,
  CPF_notify_on_start_touch_threshold = NX_NOTIFY_ON_START_TOUCH_FORCE_THRESHOLD, CPF_notify_on_end_touch_threshold = NX_NOTIFY_ON_END_TOUCH_FORCE_THRESHOLD, CPF_notify_on_touch_threshold = NX_NOTIFY_ON_TOUCH_FORCE_THRESHOLD, CPF_notify_contact_modifications = NX_NOTIFY_CONTACT_MODIFICATION
}
 
enum  PhysxD6JointDriveType { D6_joint_drive_position = NX_D6JOINT_DRIVE_POSITION, D6_joint_drive_velocity = NX_D6JOINT_DRIVE_VELOCITY }
 
enum  PhysxD6JointFlag { D6_joint_slerp_drive = NX_D6JOINT_SLERP_DRIVE, D6_joint_gear_disabled = NX_D6JOINT_GEAR_ENABLED }
 
enum  PhysxD6JointMotion { D6_joint_motion_locked = NX_D6JOINT_MOTION_LOCKED, D6_joint_motion_limited = NX_D6JOINT_MOTION_LIMITED, D6_joint_motion_free = NX_D6JOINT_MOTION_FREE }
 
enum  PhysxDistanceJointFlag { DJF_max_distance_enabled = NX_DJF_MAX_DISTANCE_ENABLED, DJF_mix_distance_enabled = NX_DJF_MIN_DISTANCE_ENABLED, DJF_spring_enabled = NX_DJF_SPRING_ENABLED }
 
enum  PhysxFilterOp {
  FO_and = NX_FILTEROP_AND, FO_or = NX_FILTEROP_OR, FO_xor = NX_FILTEROP_XOR, FO_nand = NX_FILTEROP_NAND,
  FO_nor = NX_FILTEROP_NOR, FO_nxor = NX_FILTEROP_NXOR, FO_swap_and = NX_FILTEROP_SWAP_AND
}
 
enum  PhysxForceFieldCoordinates { FFC_cartesian, FFC_spherical, FFC_cylindrical, FFC_toroidal }
 
enum  PhysxForceFieldShapeGroupFlag { FFSG_exclude_group = NX_FFSG_EXCLUDE_GROUP }
 
enum  PhysxForceMode {
  FM_force = NX_FORCE, FM_impulse = NX_IMPULSE, FM_velocity_change = NX_VELOCITY_CHANGE, FM_smooth_impulse = NX_SMOOTH_IMPULSE,
  FM_smooth_velocity_change = NX_SMOOTH_VELOCITY_CHANGE, FM_acceleration = NX_ACCELERATION
}
 
enum  PhysxJointFlag { JF_collision_enabled = NX_JF_COLLISION_ENABLED, JF_visualization = NX_JF_VISUALIZATION }
 
enum  PhysxMaterialFlag { MF_anisotropic = NX_MF_ANISOTROPIC, MF_disable_friction = NX_MF_DISABLE_FRICTION, MF_disable_strong_friction = NX_MF_DISABLE_STRONG_FRICTION }
 
enum  PhysxParameter {
  P_penalty_force = NX_PENALTY_FORCE, P_skin_width = NX_SKIN_WIDTH, P_default_sleep_lin_vel_squared = NX_DEFAULT_SLEEP_LIN_VEL_SQUARED, P_default_sleep_ang_vel_squared = NX_DEFAULT_SLEEP_ANG_VEL_SQUARED,
  P_bounce_threshold = NX_BOUNCE_THRESHOLD, P_dyn_frict_scaling = NX_DYN_FRICT_SCALING, P_sta_frict_scaling = NX_STA_FRICT_SCALING, P_max_angular_velocity = NX_MAX_ANGULAR_VELOCITY,
  P_continuous_cd = NX_CONTINUOUS_CD, P_visualization_scale = NX_VISUALIZATION_SCALE, P_adaptive_force = NX_ADAPTIVE_FORCE, P_coll_veta_jointed = NX_COLL_VETO_JOINTED,
  P_trigger_trigger_callback = NX_TRIGGER_TRIGGER_CALLBACK, P_select_hw_algo = NX_SELECT_HW_ALGO, P_ccd_epsilon = NX_CCD_EPSILON, P_solver_convergence_threshold = NX_SOLVER_CONVERGENCE_THRESHOLD,
  P_bbox_noise_level = NX_BBOX_NOISE_LEVEL, P_implicit_sweep_cache_size = NX_IMPLICIT_SWEEP_CACHE_SIZE, P_default_sleep_energy = NX_DEFAULT_SLEEP_ENERGY, P_constant_fluid_max_packets = NX_CONSTANT_FLUID_MAX_PACKETS,
  P_constant_fluid_max_particles_per_step = NX_CONSTANT_FLUID_MAX_PARTICLES_PER_STEP, P_asynchronous_mesh_creation = NX_ASYNCHRONOUS_MESH_CREATION, P_force_field_custom_kernel_epsilon = NX_FORCE_FIELD_CUSTOM_KERNEL_EPSILON, P_improved_spring_solver = NX_IMPROVED_SPRING_SOLVER,
  P_visualize_world_axes = NX_VISUALIZE_WORLD_AXES, P_visualize_body_axes = NX_VISUALIZE_BODY_AXES, P_visualize_body_mass_axes = NX_VISUALIZE_BODY_MASS_AXES, P_visualize_body_lin_velocity = NX_VISUALIZE_BODY_LIN_VELOCITY,
  P_visualize_body_ang_velocity = NX_VISUALIZE_BODY_ANG_VELOCITY, P_visualize_body_joint_groups = NX_VISUALIZE_BODY_JOINT_GROUPS, P_visualize_joint_local_axes = NX_VISUALIZE_JOINT_LOCAL_AXES, P_visualize_joint_world_axes = NX_VISUALIZE_JOINT_WORLD_AXES,
  P_visualize_joint_limits = NX_VISUALIZE_JOINT_LIMITS, P_visualize_contact_point = NX_VISUALIZE_CONTACT_POINT, P_visualize_contact_normal = NX_VISUALIZE_CONTACT_NORMAL, P_visualize_contact_error = NX_VISUALIZE_CONTACT_ERROR,
  P_visualize_contact_force = NX_VISUALIZE_CONTACT_FORCE, P_visualize_actor_axes = NX_VISUALIZE_ACTOR_AXES, P_visualize_collision_aabbs = NX_VISUALIZE_COLLISION_AABBS, P_visualize_collision_shapes = NX_VISUALIZE_COLLISION_SHAPES,
  P_visualize_collision_axes = NX_VISUALIZE_COLLISION_AXES, P_visualize_collision_compounds = NX_VISUALIZE_COLLISION_COMPOUNDS, P_visualize_collision_vnormals = NX_VISUALIZE_COLLISION_VNORMALS, P_visualize_collision_fnormals = NX_VISUALIZE_COLLISION_FNORMALS,
  P_visualize_collision_edges = NX_VISUALIZE_COLLISION_EDGES, P_visualize_collision_spheres = NX_VISUALIZE_COLLISION_SPHERES, P_visualize_collision_static = NX_VISUALIZE_COLLISION_STATIC, P_visualize_collision_dynamic = NX_VISUALIZE_COLLISION_DYNAMIC,
  P_visualize_collision_free = NX_VISUALIZE_COLLISION_FREE, P_visualize_collision_ccd = NX_VISUALIZE_COLLISION_CCD, P_visualize_collision_skeletons = NX_VISUALIZE_COLLISION_SKELETONS, P_visualize_fluid_emitters = NX_VISUALIZE_FLUID_EMITTERS,
  P_visualize_fluid_position = NX_VISUALIZE_FLUID_POSITION, P_visualize_fluid_velocity = NX_VISUALIZE_FLUID_VELOCITY, P_visualize_fluid_kernel_radius = NX_VISUALIZE_FLUID_KERNEL_RADIUS, P_visualize_fluid_bounds = NX_VISUALIZE_FLUID_BOUNDS,
  P_visualize_fluid_packets = NX_VISUALIZE_FLUID_PACKETS, P_visualize_fluid_motion_limit = NX_VISUALIZE_FLUID_MOTION_LIMIT, P_visualize_fluid_dyn_collision = NX_VISUALIZE_FLUID_DYN_COLLISION, P_visualize_fluid_stc_collision = NX_VISUALIZE_FLUID_STC_COLLISION,
  P_visualize_fluid_mesh_packets = NX_VISUALIZE_FLUID_MESH_PACKETS, P_visualize_fluid_drains = NX_VISUALIZE_FLUID_DRAINS, P_visualize_fluid_packet_data = NX_VISUALIZE_FLUID_PACKET_DATA, P_visualize_cloth_mesh = NX_VISUALIZE_CLOTH_MESH,
  P_visualize_cloth_collisions = NX_VISUALIZE_CLOTH_COLLISIONS, P_visualize_cloth_selfcollisions = NX_VISUALIZE_CLOTH_SELFCOLLISIONS, P_visualize_cloth_workpackets = NX_VISUALIZE_CLOTH_WORKPACKETS, P_visualize_cloth_sleep = NX_VISUALIZE_CLOTH_SLEEP,
  P_visualize_cloth_sleep_vertex = NX_VISUALIZE_CLOTH_SLEEP_VERTEX, P_visualize_cloth_tearable_vertices = NX_VISUALIZE_CLOTH_TEARABLE_VERTICES, P_visualize_cloth_tearing = NX_VISUALIZE_CLOTH_TEARING, P_visualize_cloth_attachment = NX_VISUALIZE_CLOTH_ATTACHMENT,
  P_visualize_cloth_validbounds = NX_VISUALIZE_CLOTH_VALIDBOUNDS, P_visualize_softbody_mesh = NX_VISUALIZE_SOFTBODY_MESH, P_visualize_softbody_collisions = NX_VISUALIZE_SOFTBODY_COLLISIONS, P_visualize_softbody_workpackets = NX_VISUALIZE_SOFTBODY_WORKPACKETS,
  P_visualize_softbody_sleep = NX_VISUALIZE_SOFTBODY_SLEEP, P_visualize_softbody_sleep_vertex = NX_VISUALIZE_SOFTBODY_SLEEP_VERTEX, P_visualize_softbody_tearable_vertices = NX_VISUALIZE_SOFTBODY_TEARABLE_VERTICES, P_visualize_softbody_tearing = NX_VISUALIZE_SOFTBODY_TEARING,
  P_visualize_softbody_attachment = NX_VISUALIZE_SOFTBODY_ATTACHMENT, P_visualize_softbody_validbounds = NX_VISUALIZE_SOFTBODY_VALIDBOUNDS, P_visualize_active_vertices = NX_VISUALIZE_ACTIVE_VERTICES, P_visualize_force_fields = NX_VISUALIZE_FORCE_FIELDS
}
 
enum  PhysxProjectionMode { PM_none = NX_JPM_NONE, PM_point_mindist = NX_JPM_POINT_MINDIST, PM_linear_mindist = NX_JPM_LINEAR_MINDIST }
 
enum  PhysxPruningStructure {
  PS_none = NX_PRUNING_NONE, PS_octree = NX_PRUNING_OCTREE, PS_quadtree = NX_PRUNING_QUADTREE, PS_dynamic_aabb_tree = NX_PRUNING_DYNAMIC_AABB_TREE,
  PS_static_aabb_tree = NX_PRUNING_STATIC_AABB_TREE
}
 
enum  PhysxPulleyJointFlag { PJF_is_rigid = NX_PJF_IS_RIGID, PJF_motor_enabled = NX_PJF_MOTOR_ENABLED }
 
enum  PhysxRevoluteJointFlag { RJF_limit_enabled = NX_RJF_LIMIT_ENABLED, RJF_motor_enabled = NX_RJF_MOTOR_ENABLED, RJF_spring_enabled = NX_RJF_SPRING_ENABLED }
 
enum  PhysxSceneFlag {
  SF_disable_sse = NX_SF_DISABLE_SSE, SF_disable_collisions = NX_SF_DISABLE_COLLISIONS, SF_restricted_scene = NX_SF_RESTRICTED_SCENE, SF_disable_scene_mutex = NX_SF_DISABLE_SCENE_MUTEX,
  SF_force_cone_friction = NX_SF_FORCE_CONE_FRICTION, SF_sequential_primary = NX_SF_SEQUENTIAL_PRIMARY, SF_fluid_performance_hint = NX_SF_FLUID_PERFORMANCE_HINT
}
 
enum  PhysxShapeFlag {
  SF_trigger_on_enter = NX_TRIGGER_ON_ENTER, SF_trigger_on_leave = NX_TRIGGER_ON_LEAVE, SF_trigger_on_stay = NX_TRIGGER_ON_STAY, SF_trigger_enable = NX_TRIGGER_ENABLE,
  SF_visualization = NX_SF_VISUALIZATION, SF_disable_collision = NX_SF_DISABLE_COLLISION, SF_disable_raycasting = NX_SF_DISABLE_RAYCASTING, SF_disable_response = NX_SF_DISABLE_RESPONSE,
  SF_disable_scene_queries = NX_SF_DISABLE_SCENE_QUERIES, SF_point_contact_force = NX_SF_POINT_CONTACT_FORCE, SF_feature_indices = NX_SF_FEATURE_INDICES, SF_dynamic_dynamic_ccd = NX_SF_DYNAMIC_DYNAMIC_CCD,
  SF_fluid_drain = NX_SF_FLUID_DRAIN, SF_fluid_disable_collision = NX_SF_FLUID_DISABLE_COLLISION, SF_fluid_twoway = NX_SF_FLUID_TWOWAY, SF_cloth_drain = NX_SF_CLOTH_DRAIN,
  SF_cloth_disable_collision = NX_SF_CLOTH_DISABLE_COLLISION, SF_cloth_twoway = NX_SF_CLOTH_TWOWAY, SF_softbody_drain = NX_SF_SOFTBODY_DRAIN, SF_softbody_disable_collision = NX_SF_SOFTBODY_DISABLE_COLLISION,
  SF_softbody_twoway = NX_SF_SOFTBODY_TWOWAY
}
 
enum  PhysxShapesType { ST_static = NX_STATIC_SHAPES, ST_dynamic = NX_DYNAMIC_SHAPES, ST_all = NX_ALL_SHAPES }
 
enum  PhysxSoftBodyFlag {
  SBF_static = NX_SBF_STATIC, SBF_disable_collision = NX_SBF_DISABLE_COLLISION, SBF_selfcollision = NX_SBF_SELFCOLLISION, SBF_visualization = NX_SBF_VISUALIZATION,
  SBF_gravity = NX_SBF_GRAVITY, SBF_volume_conservtion = NX_SBF_VOLUME_CONSERVATION, SBF_damping = NX_SBF_DAMPING, SBF_collision_twoway = NX_SBF_COLLISION_TWOWAY,
  SBF_tearable = NX_SBF_TEARABLE, SBF_hardware = NX_SBF_HARDWARE, SBF_comdamping = NX_SBF_COMDAMPING, SBF_validbounds = NX_SBF_VALIDBOUNDS,
  SBF_fluid_collision = NX_SBF_FLUID_COLLISION, SBF_disable_dynamic_ccd = NX_SBF_DISABLE_DYNAMIC_CCD, SBF_adhere = NX_SBF_ADHERE
}
 
enum  PhysxSphericalJointFlag {
  SJF_twist_limit_enabled = NX_SJF_TWIST_LIMIT_ENABLED, SJF_swing_limit_enabled = NX_SJF_SWING_LIMIT_ENABLED, SJF_twist_spring_enabled = NX_SJF_TWIST_SPRING_ENABLED, SJF_swing_spring_enabled = NX_SJF_SWING_SPRING_ENABLED,
  SJF_joint_spring_enabled = NX_SJF_JOINT_SPRING_ENABLED, SJF_perpendicular_dir_constraints = NX_SJF_PERPENDICULAR_DIR_CONSTRAINTS
}
 
enum  PhysxUpAxis { X_up = NX_X, Y_up = NX_Y, Z_up = NX_Z }
 
enum  PhysxVertexAttachmentStatus { VAS_none = NX_CLOTH_VERTEX_ATTACHMENT_NONE, VAS_global = NX_CLOTH_VERTEX_ATTACHMENT_GLOBAL, VAS_shape = NX_CLOTH_VERTEX_ATTACHMENT_SHAPE }
 
enum  PhysxWheelFlag { WF_steerable_input = 1<<0, WF_steerable_auto = 1<<1, WF_affected_by_handbrake = 1<<2, WF_accelerated = 1<<3 }
 
enum  PhysxWheelShapeFlag {
  WSF_wheel_axis_contact_normal = NX_WF_WHEEL_AXIS_CONTACT_NORMAL, WSF_input_lat_slipvelocity = NX_WF_INPUT_LAT_SLIPVELOCITY, WSF_input_lng_slipvelocity = NX_WF_INPUT_LNG_SLIPVELOCITY, WSF_unscaled_spring_behavior = NX_WF_UNSCALED_SPRING_BEHAVIOR,
  WSF_axle_speed_override = NX_WF_AXLE_SPEED_OVERRIDE, WSF_emulate_legacy_wheel = NX_WF_EMULATE_LEGACY_WHEEL, WSF_clamped_friction = NX_WF_CLAMPED_FRICTION
}
 
- Public Attributes inherited from TypedObject
 get_type
 
- Public Attributes inherited from ReferenceCount
 get_ref_count
 Returns the current reference count. More...
 

Detailed Description

A joint which behaves in a similar way to a hinge or axel.

A hinge joint removes all but a single rotational degree of freedom from two objects. The axis along which the two bodies may rotate is specified with a point and a direction vector.

Definition at line 33 of file physxRevoluteJoint.h.

Member Function Documentation

◆ get_angle()

float PhysxRevoluteJoint::get_angle ( ) const

Retrieves the current revolute joint angle.

The relative orientation of the bodies is stored when the joint is created, or when set_axis() or set_anchor() is called. This initial orientation returns an angle of zero, and joint angles are measured relative to this pose. The angle is in the range [-180, 180], with positive angles CCW around the axis, measured from body2 to body1.

Definition at line 81 of file physxRevoluteJoint.cxx.

◆ get_flag()

bool PhysxRevoluteJoint::get_flag ( PhysxRevoluteJointFlag  flag) const

Returns the value of a single RevoluteJointFlag.

Definition at line 141 of file physxRevoluteJoint.cxx.

◆ get_projection_mode()

PhysxEnums::PhysxProjectionMode PhysxRevoluteJoint::get_projection_mode ( ) const

Retrieves the joints projection mode.

Definition at line 112 of file physxRevoluteJoint.cxx.

◆ get_velocity()

float PhysxRevoluteJoint::get_velocity ( ) const

Retrieves the revolute joint angle's rate of change (angular velocity).

It is the angular velocity of body1 minus body2 projected along the axis.

Definition at line 92 of file physxRevoluteJoint.cxx.

◆ load_from_desc()

void PhysxRevoluteJoint::load_from_desc ( const PhysxRevoluteJointDesc jointDesc)

Loads the entire state of the joint from a descriptor with a single call.

Definition at line 65 of file physxRevoluteJoint.cxx.

◆ save_to_desc()

void PhysxRevoluteJoint::save_to_desc ( PhysxRevoluteJointDesc jointDesc) const

Saves the state of the joint object to a descriptor.

Definition at line 55 of file physxRevoluteJoint.cxx.

◆ set_flag()

void PhysxRevoluteJoint::set_flag ( PhysxRevoluteJointFlag  flag,
bool  value 
)

Sets or clears a single RevoluteJointFlag.

Definition at line 122 of file physxRevoluteJoint.cxx.

◆ set_limits()

void PhysxRevoluteJoint::set_limits ( const PhysxJointLimitDesc low,
const PhysxJointLimitDesc high 
)

Sets angular joint limits.

If either of these limits are set, any planar limits in PhysxJoint are ignored. The limits are angles defined the same way as the values that get_angle() returns.

The following has to hold:

Pi < lowAngle < highAngle < Pi Both limits are disabled by default. Also sets coefficients of restitutions for the low and high angular limits. These settings are only used if valid limits are set using set_limits(). These restitution coefficients work the same way as for contacts.

The coefficient of restitution determines whether a collision with the joint limit is completely elastic (like pool balls, restitution = 1, no energy is lost in the collision), completely inelastic (like putty, restitution = 0, no rebound after collision) or somewhere in between. The default is 0 for both.

This automatically enables the limit.

Definition at line 229 of file physxRevoluteJoint.cxx.

◆ set_motor()

void PhysxRevoluteJoint::set_motor ( const PhysxMotorDesc motor)

Sets motor parameters for the joint.

For a positive velTarget, the motor pulls the first body towards its pulley, for a negative velTarget, the motor pulls the second body towards its pulley.

velTarget - the relative velocity the motor is trying to achieve. The motor will only be able to reach this velocity if the maxForce is sufficiently large. If the joint is moving faster than this velocity, the motor will actually try to brake. If you set this to infinity then the motor will keep speeding up, unless there is some sort of resistance on the attached bodies.

maxForce - the maximum force the motor can exert. Zero disables the motor. Default is 0, should be >= 0. Setting this to a very large value if velTarget is also very large may not be a good idea.

freeSpin - if this flag is set, and if the joint is moving faster than velTarget, then neither braking nor additional acceleration will result. default: false.

This automatically enables the motor.

Definition at line 200 of file physxRevoluteJoint.cxx.

◆ set_projection_mode()

void PhysxRevoluteJoint::set_projection_mode ( PhysxProjectionMode  mode)

Sets the joint projection mode.

Definition at line 102 of file physxRevoluteJoint.cxx.

◆ set_spring()

void PhysxRevoluteJoint::set_spring ( const PhysxSpringDesc spring)

Sets spring parameters.

The spring is implicitly integrated so no instability should result for arbitrary spring and damping constants. Using these settings together with a motor is not possible – the motor will have priority and the spring settings are ignored. If you would like to simulate your motor's internal friction, do this by altering the motor parameters directly.

spring - The rotational spring acts along the hinge axis and tries to force the joint angle to zero. A setting of zero disables the spring. Default is 0, should be >= 0.

damper - Damping coefficient; acts against the hinge's angular velocity. A setting of zero disables the damping. The default is 0, should be >= 0.

targetValue - The angle at which the spring is relaxed. In [-Pi,Pi]. Default is 0.

This automatically enables the spring

Definition at line 169 of file physxRevoluteJoint.cxx.


The documentation for this class was generated from the following files: